EMCU
by E.Marinoni
Skip to content
  • Home
  • MCU
    • GigaDevice
      • GigaDevice – GD32 Cortex Mx introduction
      • GigaDevice launches the New GD32L233 Series 40nm Ultra-Low Power Process for Energy Saving Applications
      • GD32F4xxx examples for KEIL
    • RISC-V
      • RISC-V vs ARM
    • ST Microelectronics
      • Many thanks to STMicroelectronics
      • ST Live Days 2020
      • STM – Asset tracking soluctions
        • Asset tracking soluctions
      • STM Wiki, Community, Support, etc
      • MCU problems !!!!
      • ST7 families are in obsolescence
      • STM8
        • STM8 Introduction
          • Wiring from ST-LINK-v2 and STM8 for debug and programming
          • STM8CubeMX
        • STM8 Tutorial
          • Step By Step that explain how to start to develop a new program on STM8S
        • STM8 Evaluation boards
          • STM8S-Discovery
          • STM8L-DISCOVERY
        • STM8 Library
        • STM8 Class B – Self Test Library
        • STM8AF Safe ASIL A/B
        • STM8 – BootLoader, IAP, EEPROM, etc
        • Migration tips and tricks from one family of STM8 to another family of STM8
      • STM32
        • STM32 Introduction
          • STM32L0xx – ultra-low-power EnergyLite™ MCU – Cortex M0+
          • STM32L1xx – ultra-low-power EnergyLite™ MCU – Cortex M3
          • STM32L4xx – ultra-low-power EnergyLite™ MCU – Cortex M4
            • STM32L4 SMPS
          • STM32L4+ – ultra-low-power EnergyLite™ MCU – Cortex M4 at 120 MHz
            • STM32L4 SMPS
          • STM32L5 – Excellence in ultra-low-power with more performance – Based on Cortex M33
          • STM32U5 – based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements
          • STM32G0 – M0+ MCU, it sets a new definition of what an efficient microcontroller must offer
          • STM32G4 – Cortex M4 series @170 MHz for mixed-signal applications
          • STM32F0xx – Cortex M0
            • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using KEIL
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
          • STM32F1xx – Cortex M3
          • STM32F2 – High Performance – Cortex M3
          • STM32F3 – mixed-signal MCU – Cortex M4
          • STM32F4 – High Performance – Cortex M4
          • STM32F7xx – high performance – Cortex M7
          • STM32H7xx – very high performance – Cortex M7
            • STM32H7A3/7B3 lines
          • STM32WB series – 2.4 Ghz Wireless MCUs
          • STM32WL – Long-Range wireless Sub-GHz mcu
        • Migration tips and tricks from one family of STM32 to another family of STM32
        • STM32 and IoT and Cloud
          • IoT and Cloud
            • Interact with Microsoft® Azure® IoT Hub using the X-CUBE-AZURE package
            • STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud
          • STMicroelectronics Acquires Power Amplifier and RF Front-End-Module Specialist SOMOS Semiconductor
          • NB-IoT and LTE
            • STMicroelectronics makes acquisitions to further strengthen the wireless connectivity capabilities of STM32 microcontrollers
        • STM32 Education & Training
          • STM32 doc in ITALIAN & ENGLISH language but not only
          • How to find STM32 training and further documentations
          • STM One hour web seminar
          • STM32 Education
          • STM32 – MOOCs (Massive Open Online Courses)
          • STM32 Peripheral Education (see also MCU -> ATOLLIC)
            • KeeLoq application over SPIRIT1 + S2-LP and STM32
            • STM32 & IO-LINK
            • STM32 – TCP/IP solution
            • Stack & Heap
            • STM32 Basic Timer in Interrupt & PWM mode
            • TIM14 PWM output, duty cycle regulated using a potentiometer
            • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
            • How to manage two UART (USART2 and USART1) under Interrupt
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using KEIL
            • STM32F429-Discovery & USB Virtual COM
            • STM32F429-Discovery + USB Virtual COM + TFT
            • SPEEX free audio codec
            • X-CUBE-EXTBOOT – Programming an external Quad-SPI
            • STEVAL-PCC018V1 (Serial to USB converter)
            • HAMEG Spectrum Analyzer HM 8028 connected with the TEKTRONIX 2230 oscilloscope
            • How to use STM32 in the ARDUINO IDE
          • Internet courses (UDEMY) on STM32 & C at payment
        • STM32 Programming and Development Tools
          • STM32 and STM8 Embedded Software Solutions
          • How to program the STM32
            • Production programming solutions for STM32
            • STM32 Cube Programmer
          • Quad, Octo SPI – QSPI
            • Quad-SPI – QSPI – Octo-SPI and STM32
            • How to program an external QSPI connected to the STM32
          • STM32 HAL and LL library
          • Custom STM32 boot loader
          • STM32CubeIDE
            • First embedded program for STM32 mcu using STM32CubeIDE
            • STM32 – Measure time period and frequency of a signal using the TIMER
            • Printf and Getchar (Inter.mode) via USART2 plus Timer in PWM mode
            • H2O flow meter for control your water consumption
            • How to use STM32CubeIDE for write a C code for your PC under Linux
            • Embedded C programming
          • STM32 and Microsoft Azure RTOS
          • How to create project for STM32H7 with Ethernet and LwIP stack working
          • CUBE or CUBE-MX & Library
            • Tutorial on CUBE-MX and CUBE Library
          • STM32CubeMonitor
          • How to install the toolchain for develop on STM32
          • What should I use to develop on STM32 ?
            • Suggested KIT for developing on STM32
            • How to import the examples present in STM CUBE Library for AC6 into the ATOLLIC TrueSTUDIO for STM32
            • How to import in Atollic TrueSTUDIO for STM32 a project developed for AC6 (System WorkBench)
            • How to create, using CUBE-MX, a project for Atollic TrueSTUDIO® for STM32
            • ATOLLIC TrueSTUDIO Pro features available for free for STM32 mcu
            • Adjust the configuration of SW4STM32 (AC6) environment
            • How to update your KEIL license using the Product Serial Number
            • mBED
            • IDE tips and tricks
        • STM32 Open Development Environment (ODE)
        • STM32 Security – Class B – SIL 2/3
          • Introduction to STM32 mcu security
          • STM32 Security Ecosystem – STM32 Workshop October 2020
          • STM32 – Bootloader / Secure Boot
          • STM32 cryptographic library
          • STM32 Class B – IEC60335 – Self Test Library
          • STM32 SIL2/3
        • STM32 used in 5V environment
          • STM32 and 5V environment
        • STM32 & Audio
          • Audio SW packages for STM32
          • STM32 Alexa Voice Services Solution
          • Sensory – Audio tool
        • STM32 – AI, Neural Network, Predictive maintenance & C
          • STM32 – Neural Networks, AI, Machine Learning & Predictive maintenance
          • STM32 – AI & Image recognition
          • Cartesiam
            • STM32 and Cartesiam: for equipment monitoring and more (AI, Neural Networks and Predictive Maintenance)
          • STM Partner Program for AI & Neural Networks applications
        • Digital Camera Interface (DCMI) for STM32 MCUs
        • Why use CORTEX M family instead of 8 and 16 bit MCU
        • Change, from Arduino to STM32
        • STM32 Standard Peripheral Libraries (SPL) to STM32Cube Low-Layer (LL) APIs migration tool
        • Quick start guide to “charge transfer” technology used on STM32 and STM8 for touch sensing applications
        • STM32 – Evaluation Boards
          • STM32 – NUCLEO boards
          • How to update the FW on NUCLEO boards
          • How to use NUCLEO boards + Terminal Emulation + mBed under LUBUNTU (Linux)
          • Test board for RC motors
          • X-NUCLEO expansion board
          • STM32 Power Shield
        • STM32 and Graphics (HMI graphics interface)
          • TouchGFX + X-NUCLEO-GFX01Mx & X-NUCLEO-GFX02Z1
          • X-NUCLEO-GFX01M1 expansion board adds graphic user interface (GUI) for Nucleo boards
          • TouchGFX demo for STM32F746G-DISCOVERY
          • STemWIN – graphics demo for STM32F746G-DISCO and AC6
          • STemWIN – graphics demo for STM32F746G-DISCO and AC6 that turn on/off also a LED
          • STemWIN – Tools
          • Graphical libraries for STM32 (old version)
        • Mathworks to Enable Code Generation
        • uCLinux & STM32
        • STM32 DALI
        • DRONEs & STM32
        • STMicroelectronics video on YouTube
        • STMicroelectronics Community & Forum
      • Safety packages for STM8 and STM32
        • X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32
      • STM32MP1
        • STM32MP1 Series
          • STM32MP1 intro
        • STM32MPx Tutorial & C
          • Fast startup for use the STM32MP157C-DK2
          • STM32MP1 – interesting links
      • STM32 & STM8, “charge transfer” technology for touch sensing applications
      • Direct STM support only for key customers
      • ST Partner Program
      • STM on GITHUB.COM
      • STM32CubeIDE
        • STM32CubeIDE introduction
        • First embedded program for STM32 mcu using STM32CubeIDE
        • Printf and Getchar (Inter.mode) via USART2 plus Timer in PWM mode
        • STM32 – Measure time period and frequency of a signal using the TIMER
        • H2O flow meter for control your water consumption
        • How to use STM32CubeIDE for write a C code for your PC under Linux
        • STM32CubeIDE vs KEIL
      • ATOLLIC
        • ATOLLIC TrueSTUDIO Pro features available for free for STM32 mcu
        • How to create, using CUBE-MX, a project for Atollic TrueSTUDIO® for STM32
        • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
        • How to manage two UART (USART2 and USART1) under Interrupt
        • STemWIN – graphics demo for STM32F746G-DISCO and ATOLLIC that turn on/off also a LED
        • How to import the examples present in STM CUBE Library for AC6 into the ATOLLIC TrueSTUDIO for STM32
        • How to import in Atollic TrueSTUDIO for STM32 a project developed for AC6 (System WorkBench)
        • How To Import IAR EWARM Projects Into Atollic TrueSTUDIO
        • GPIOs interrupt & Atollic
        • STM32 Basic Timer in Interrupt & PWM mode
        • TIM14 PWM output, duty cycle regulated using a potentiometer
        • TIMER Counter – for example for reading an Input button
        • STM32 – RTC calendar and time for Atollic
        • How to interface the rotary encoder to STM32 (CUBE-MX + ATOLLIC)
        • How to use ADC in Interrupt mode
        • How to use 3 channels of the ADC in DMA mode using CUBE-MX and ATOLLIC
        • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
        • Placing code and data on special memory addresses using the GNU LD linker
        • Electric Sliding Gate based on STM32F0-Discovery
        • Atollic tips and tricks
          • How to create a new project in ATOLLIC
          • How to share your ATOLLIC project
          • How to import a .ZIP project in Atollic
          • Atollic debug configuration for quick DOWNLOAD and RUN
          • ATOLLIC – How to generate .exe – .bin – etc file extension
      • Oscillator design guide for STM8 and STM32 microcontrollers, AN2867
      • STM32 & STM8 product finder
      • ST-LINK
        • How to update the ST-LINK FW under Windows
        • How to update the ST-LINK FW under Linux (Lubuntu)
        • Wiring from ST-LINK-v2 and STM8 for debug and programming
      • STM32 Cube Programmer
      • STM Studio
      • SPC5
        • SPC5 Introduction
        • SPC5-STUDIO – free tools for develop on the SPC5 families
        • SPC5 – Embedded Software
        • SPC5 Automotive MCU Eval Tools
        • SPC5 cryptographic library
      • Tutorial on the web
      • Explore STM product portfolio
      • NeaPolis Innovation
        • ChibiOS – ChibiStudio and Neapolis Innovation – STM
  • Motor Control & C
    • Tutorial on Electrical Motors
    • Motor Control Acronyms
    • STM32 Motor Control
      • How to use the Motor Control Workbench and P-NUCLEO-IHM002
    • Combo – STSPIN
      • How to use the STEVAL-SPIN3201 (based on STSPIN32F0)
      • EVALKIT-ROBOT-1 evaluation kit ready-to-use servo brushless solution
    • STLUX and STNRG
    • High-integration chipset for EFI small engine applications
    • H-Bridge DC Motor Driver for Automotive Application
    • LIN, CAN & C
      • L99MM70XP – Integrated microprocessor driven device intended for LIN controlled exterior mirrors
      • L99PM72PXP – Advanced power management IC, with embedded LIN and HS CAN transceiver, supporting CAN Partial Networking
    • How to update the EVAL6470H-DISC and how to use it with the Pro Hybrid motor
    • L99UDL01 Automotive universal door lock IC – tips and tricks
  • RF & Connectivity
    • STM MAC address
    • ANTENNAs
      • Introductions to the Antennas
      • RF Choke
      • Custom antennas
    • RF Introduction
      • Comparison: ZigBee – WiFi – BlueTooth – UWB
      • Wireless data technologies
      • WiFi Modules
        • Introduction to the WiFi SPWF04Sx
          • Introduction to SPWF04Sx evaluation board
          • How to update the SW on SPWF04Sx (new WiFi module) present on the X-NUCLEO-IDW04A1 using Flash Loader
          • How to create a test account on IBM Watson IoT Platform + WiFi SPWF04Sx + TLS and MQTT
        • Introduction to the WiFi SPWF01Sx
          • Branca board based on STM WiFi module SPWF01SA.11
          • Quick start guide how to use the Branca board – SPWF01Sx module
          • WiFi – 802.11 Association & Dissociation Reason Code
      • BlueTooth
        • Old selection guide for BLE components and modules
        • STEVAL-BCN002V1 – Bluetooth LE sensor node development kit, based on BlueNRG-2 (compliant with Bluetooth 5.0)
        • BLE 4.x – 1 Mega bits per second is just wrong
        • Short introduction to BEACONS
        • BlueNRG Mesh
        • How to develop a new project on the SPBTLE-1S module (based on BlueNRG-1 component)
        • Suggested kit for testing BlueNRG-MS (BTLE v.4.1) on STM32 mcu
        • How to use SPBTLE-RF + NUCLEO-F401RE and graphics GUI
        • How to update FW via GUI on the BlueNRG, BlueNRG-MS or SPBTLE-RF (BlueNRG-MS module)
        • How to use BlueNRG-MS (BTLE v.4.1) & Enocean PTM 215B
        • Getting Started with ST Bluetooth Low Energy (BLE), NUCLEO and ARM mBED IDE/Compiler
        • Half – duplex voice streaming over Bluetooth Low Energy
        • STEVAL-BLUEMIC-1
        • BlueCoin – BTLE + MEMs for audio
        • SensorTile development kit
        • SensiBLE IoT Module – from: sensiedge.com
        • WESU1 – Wearable sensor unit reference design
        • Creating a BTLE star network connected via Wi-Fi to IBM Bluemix cloud
        • BEACON, iBEACON & BTLE
      • Sub1Ghz
        • ISM World wide regulation
        • Sub1Ghz Introduction
        • Sub1Ghz SW & FW
        • STM – kit for radio remote control
        • P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8
        • P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8 + SSD1306 I2C Oled Display
        • P2P based on S2-LP (STEVAL-FKI868V1) and NUCLEO-L053R8
        • How to use the X-NUCLEO-IDS01A4 (SPIRIT1) in P2P mode + ACK under mBED
        • How to use the X-CUBE-SUBG1 (SW) on SPIRIT1
        • How to use SPSGRF (Sub1Ghz module) for remote a thermostat
        • Wireless DoorBell
          • P2P wireless DoorBell, based on the SPIRIT1
          • Wireless DoorBell, based on the SPIRIT1 & mBed
      • LORA
      • SigFox
      • SigFox vs. LoRa
      • 6LoWPAN
        • 6LoWPAN wireless sensor network connected to the Internet through WiFi module
        • Quickly build a Contiki, 6LoWPAN, BTLE sensor network
      • WizziLab – Sub1Ghz multiprotocol Board & Concentrator
    • NFC & RFID
      • NFC introduction
      • STM NFC Sensor TAG, a complete solution for asset tracking applications (Smart Pallets)
      • ST25 – SDK for NFC – Multi platform Java library
    • GPS/Galileo/Glonass/BeiDou/QZSS
      • Teseo-LIV3F
    • SIM & eSIM
    • Cellular & Cloud
      • P-L496G-CELL01 – 2G/3G Cellular to Cloud Pack with STM32L496AG MCU and Quectel UG96
    • NB-IOT
      • Avnet Silica NB-IoT Sensor Shield (AVNET-SILICA BG96-SHIELD)
    • KNX
    • PLM
    • Smart Metering
    • Introduction to the signals modulation
  • MEMS & Sensors
    • MEMS software
      • GitHub MEMS driver written in C code
    • Teseo-LIV3F – GPS/Galileo/Glonass/BeiDou/QZSS
    • Accelerometers
    • Gyroscopes
    • e-Compasses
    • Humidity Sensors
    • iNEMO-Inertial Modules
    • MEMS Microphones
    • Pressure Sensors
    • Proximity Sensors
      • Proximity (ToF) VL53L1X in 2D LIDAR application
      • How to detect an object using the VL53L0X & X-NUCLEO-53L0A1 (evaboard)
      • VL53L0X (proximity sensor, up to 2m) and STM32F042K6
    • Temperature Sensors
    • UV sensors
    • Touchscreen Controllers
    • Automotive Sensors
    • MEMS Tutorial
    • MEMS general purpose evaboards
      • MEMS – Predictive Maintenance using an Intelligent Logging Kit for IoT applications
        • Some quick info concerning .JSON file
    • Open.MEMS & Unicleo-GUI
  • Wireless Charger
    • Wireless charger Introduction
    • STEVAL-ISB027V1 – quick start guide
  • IoT & Security
    • IoT
    • STM & Security
  • References
    • How to use the Serial to USB converter – STEVAL-PCC018V1
    • MCU architecture
    • Embedded C programming
    • C & C++
    • C & C ++ Things to remember
    • How to use STM32CubeIDE for write a C code for your PC under Linux
    • Acronimi – Acronyms
  • Python
    • MicroPython
    • Introduction to Python
    • How to install PYTHON on Windows 10
    • Python & LUBUNTU
    • How to run a Python file under LINUX
    • Python – Serial COM
  • Linux & C
    • Introduction to Linux
    • Linux basic commands
    • UBUNTU
    • Extra tools to install on Ubuntu
      • How to visualize Data & Time on the top bar on UBUNTU Ubuntu 18.04 LTS
    • How to install debian (UBUNTU) .sh file
    • Installare i pacchetti (.deb, .tar.gz, .tar.bz2, .sh, .run) su Linux Ubuntu
    • GtkTerm – Terminal Emulator
    • Minicom for use Serial COM under Linux
    • Configurare LUBUNTU
    • How to install the HP LaserJet Pro MFP M26a on UBUNTU (18.04.3 LTS)
    • How to use Android Studio, my first project
    • VirtualBOX – links
    • How to use STM32CubeIDE for write a C code for your PC under Linux
  • Standard Connectors
  • Useful electronic applications
    • MeshPower – an electronic application that helps men of the Third World
  • Arduino and STM32
    • Car Parking Assistant
  • Free time
    • Electronic Equipment
      • Open Bench Logic Sniffer
      • NanoVNA – antenna analyzer
    • CAD
      • EasyEda
        • EasyEda – Tutorial (in Italian language)
        • EasyEda – Tutorial n.2 (in Italian language)
      • Fritzing
      • Eagle
        • Eagle – Tutorial (in Italian language)
      • 3D Gerber Viewer – Mayhew Labs
    • 3D-Printer
      • How to test a filament for your 3D printer
      • Differences between PLA and ABS
      • Tutto quanto c’è da sapere su 3D Printer Creality Ender 3 (in Italian language)
      • Configure Ultimaker CURA software for use the Creality 3D printer model ENDER 3
      • Resins to finish the 3D printed pieces
      • 3D Objects
        • Stick-Sul – IR sensor LED
        • Support for 60mm diameter fan, for remove the humidity in an outdoor electric box.
        • Brackets to lift laptops
    • Mechanics
      • Bearing extractors
    • ESP8266
      • Module EPS8266-01 (WiFi)
      • ESPHome for drive EPS8266-01s in Home Assistant
    • Home & Building Automation
      • Home Alarm based on STM32 NUCLEO 64 pin
      • WiFi and Ethernet Video intercom
        • WiFi Video intercom on smartphone – EUFY HD 2K
        • WiFi and Ethernet Video intercom on smartphone – Perel Scamset8
      • Home Assistant
        • Introduction to Home Assistant – (hassio)
        • Suggested kit for install Home Assistant
        • Home Assistant (HA) tips and tricks
        • Install a text editor in Home Assistant for edit it’s files
        • How to enable some automation only during the night
        • Third party add-on or plug-in for Home Assistant (HA)
        • Introduction to Home Assistant (HA) Automations
        • ConBee II, ZigBee USB Gateway
        • Turn on the home entrance light if is night using the Xiaomi Motion sensor and Shelly 1
        • Osram Smart+ (LED bulb Zigbee) & Home Assistant
        • Introduction to Shelly 1
        • Remotely access to Home Assistant (from Internet)
        • ESPHome for drive EPS8266-01s or EPS8266-01 in Home Assistant
        • Xiaomi Mi Windows and Doors Sensor in Home Assistant
        • XIAOMI – AQARA, sensors & actuators
        • How to ADD new device to ConBee II – ZigBee USB Gateway
        • Home Assistant – Automation for Garden Irrigation
        • Comparison -> ZigBee – WiFi – BlueTooth – UWB
      • Electronic key access
        • Transponder controlled lock-unlock key
      • Distance sensors and photocells
        • Car Parking Assistant – STM32 + ARDUINO ide
        • How to detect an object using the VL53L0X & X-NUCLEO-53L0A1 (evaboard)
        • PIR sensor based on: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111
      • KNX Home & Building Automation
        • KNX official page
        • STM – KNX transceiver
      • EVR electronics – GSM thermostat, Gate remote control and GSM telephone dialer
      • overVolt – Domotica (in Italian language)
      • Automatic Gate
        • DC motor with Honeywell Hall sensor (it’s used like an encoder)
        • Sliding gate with a guillotine for secure lock
        • Electric Sliding Gate based on STM32F0-Discovery
        • Automatic Swing Gate based on STM32F0-Discovery
        • Automatic Sliding Gate based on NUCLEO-L152RE
      • WireLess
        • Comparison: ZigBee – WiFi – BlueTooth – UWB
        • Compatibility between wireless 433MHz and WiFi (2.4GHz) objects purchased on the Internet
        • An idea how to show on your smartphone the status of your home burglar alarm
        • Kekeda 1PSC WiFi smart door/window sensor – SMART LIFE & ALEXA compatible
        • Smart Home switch controlled via WiFi and 433Mhz (Kerodamo)
        • 2ch radio control (in Italian language)
        • Amazon Smart Plug – Alexa compliant
        • Wireless DoorBell
          • Wireless DoorBell – Based on P2P for SPIRIT1 & NUCLEO-L053R8
          • Wireless Doorbell based on SPIRIT1 & NUCLEO boards
      • 12V To 3.3V 4 Channel Optocoupler Isolation Board Isolated Module PLC Signal Level Voltage Converter Board 4Bit
      • DC Current Meter Voltmeter w/ Ampere Shunt
      • Soil Humidity Sensor Hygrometer Measure Module
      • New Samsung Wind Free – How to configure a dual split
      • Temperature Controller Thermostat – XH-W3001 220Vac 10A
      • Programmable Timers
        • Timer – YOUTHINK Mod:TM601F – How to program it / Come programmarlo
        • Timer – Electraline 58107 – Come programmarlo (in Italian language)
    • IP CAM for surveillance
      • Network informations
      • Some Tips & Tricks regarding IP (Internet) Camera
      • Come configurare le telecamere Foscam modello FI9818W e similari con connessione via FastWeb
    • LAN – WLAN – Internet
      • GSM, EDGE, UMTS, HSPA, HSPA+, LTE, 5G
      • Identificativo MCC MNC degli operatori mobili Italiani
      • What means CAT 1, 3, etc, Band 3, 7, etc and Carrier Aggregation (Internet Key and Wireless Router)
      • The ADSL problem when you are end of line (very far from the ADSL BOX)
      • Final solution for reach a good and stable Internet connection
      • FastWeb + Fritz Box 7390 + Huawei B525s-23a
      • FastWeb + Fritz Box 7390 + Huawei E3372
      • IP Network Informations
      • Huawei B525s-23a – 4G, LTE (CAT6), WLAN Router, with WiFi at 2.4 and 5 GHz
      • Fritz! wlan repeater n/g
      • DLink
        • DSP-W215 mydlink™ Home Smart Plug – How to connect it to your ADSL modem
      • TP-LINK
        • Load Balance Broadband Router – TP-Link TL-R470T+
        • TP-Link RE200 – AC750 Wireless WiFi Repeater
        • TP-LINK – TL-WPA4220T KIT – How to use it
        • TP-Link CPE210 Access Point Wireless for External use
    • PC & C
      • Notebook Microtech e.Book PRO – N4000 with Ubuntu + WD GREEN 120GB Internal SSD M.2 SATA
      • How to install the HP LaserJet Pro MFP M26a on UBUNTU (18.04.3 LTS)
    • NAS – SYNOLOGY DS218J
      • Sync a Directory from local PC to your local Synology NAS
    • Display & Senor
      • How to use SSD1306 I2C OLED display and NUCLEO-L053R8 board
      • SSD1306 OLED Display & HDC1080 Temperature and Humidity sensor
    • Third party interesting software & video
      • Web Learning – STM32 Video Tutorial
      • Le Tan Phuc – STM32 Video Tutorial
      • Majerle WebSite
        • Majerle – github
    • Voltage Regulators
      • 78XX / 79XX ecco cosa sono…
      • LM317 Adjustable Voltage Regulator
    • Interesting Circuits
      • IR Remote Tester
      • 220 volt led blinking
      • 7 life hack with transistor
      • Stepper Motor Run Without Driver
    • Tubes diameters in inches and millimeters
    • Water tanks and accessories
    • How to make, from a shoe box, a fun box
    • Radio & C
      • AOR – AR3000 & AR3000A
    • Drone & C
      • Some info concerning FrSky Receiver
      • FlySky i6 FS-i6 radio control
      • 4WD Robot Car
      • How to use the Adafruit Motor Shield on STM32 NUCLEO
      • Understand the way to use HC-SRF04 on STM32 (Nucleo board) and mBED
    • Prese Telefoniche Italiane, Cavi Ethernet, Crimpatrici e collegamenti
    • Hacker corner
      • Gadgets that every Hacker must have
      • overVolt Blog – In Italian language
        • overVolt – Patreon Video (in Italian language)
        • overVolt – Patreon overVolt site (in Italian language)
        • overVolt – on YouTube (in Italian language)
  • Who I’m
    • Follow me on…
    • Casato dei Marinoni
  • Privacy
  • ReservedArea
    • ATTENZIONE a Facebook, WhatsApp e Messenger
    • Our WAN, LAN and WiFi configurations
    • Distribuzione H2O
    • Protected: Cronotermostato Wireless (868 MHz – BRAVO 93003101)
    • Programmatore Irrigazione da Rubinetto (mod. Verde)
    • Vastar Compressore Portatile con LCD per Moto, Auto, Bicicletta e Palloni
    • Scheda per cancello scorrevole e/o battente ad un motore a 220Vac – START-S3XL2018
    • Chinese IP & WiFi camera for external use
    • Development Board, Wiring, Button, etc
    • Tavolo da lavoro con materiale di BricoMan
    • Sopra Tavolo 50×60 h.50 cm con materiale di BricoMan
  • CoronaVirus – Covid-19
    • Combat the CoronaVirus (COVID-19) using the UV-C lamp for sterilize any things that enter in our home
    • Combattiamo il CoronaVirus (COVID-19) usando le lampade UV-C per sterilizzare qualsiasi cosa entra nella nostra casa
      • STM32 and STM8 Embedded Software Solutions
← X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32
Home Assistant, easy way to automate your home. →

Custom STM32 boot loader

Posted on 11/03/2021 by wp_2592768
If you like it, share it

For more info see here.

This entry was posted in STM32. Bookmark the permalink.
← X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32
Home Assistant, easy way to automate your home. →
  • ATTENTION

    Use FIREFOX or CHROME for a clear view of the images present in this web site

  • March 2021
    M T W T F S S
    « Feb   Apr »
    1234567
    891011121314
    15161718192021
    22232425262728
    293031  
  • Recent Posts

    • MDK KEIL COMMUNITY EDITION 17/11/2022
    • GD32 MCU Eclipse development environment for GNU ARM & RISC-V setup tutorial for Windows 17/11/2022
    • How to create a clean STM32CubeIDE Project ready to work with TouchGFX Designer 19/03/2022
    • GD32 – AN034 IAP routine based on USB host 22/02/2022
    • Cortex Mx performances 11/02/2022
    • GD-Link Adapter – Low coast emulator for GD32 01/02/2022
    • Where to find SW Tools and SW Examples for GD32 31/01/2022
    • GD32F4xxx examples for KEIL (Firmware_Library) 31/01/2022
    • GD-Link Programmer 31/01/2022
    • GD32W515 – core Cortex M33 that include Transceiver for WiFi 30/01/2022
    • GD32F3xxx examples for KEIL 27/01/2022
    • How to use the SW Expansion Packages in STM32CubeIDE 28/12/2021
    • Alexa or Home Assistant and P-NUCLEO-WB55 22/12/2021
    • TouchGFX + X-NUCLEO-GFX01Mx & X-NUCLEO-GFX02Z1 06/12/2021
    • RISC-V vs ARM 27/11/2021
    • GigaDevice launches the New GD32L233 Series 40nm Ultra-Low Power Process for Energy Saving Applications 24/11/2021
    • Many thanks to STMicroelectronics 20/11/2021
    • GD32F4xxx examples for KEIL 19/11/2021
    • GigaDevice – GD32 Cortex Mx introduction 03/11/2021
    • Home automation: BASICS 18/07/2021
    • (no title) 11/07/2021
    • ZigBee Mesh Network ver.3.0 (introduction) 17/06/2021
    • ZigBee Smart 4 Relay Switch 05/06/2021
    • Important Announcement – Annuncio Importante 19/05/2021
    • STM32 cryptographic firmware library software 11/05/2021
    • STM – MCU & MPU Embedded Software 11/05/2021
    • Predictive maintenance and anomaly detection with ST sensors 11/05/2021
    • Boost user experience & gain insights into consumer habits 10/05/2021
    • New eDesign feature makes your design project easier 10/05/2021
    • STM TouchGFX new demos available 10/05/2021
    • Smart LED drive 10/05/2021
    • STM32Cube software for facial recognition applications on STM32 10/05/2021
    • STM32WB5MM-DK – Discovery kit with STM32WB5MMG 10/05/2021
    • Happy 1st May – Buon 1° Maggio 30/04/2021
    • High-Voltage Super-Junction MOSFETs for Car Electrification 27/04/2021
    • TouchGFX 21/04/2021
    • STSPIN & STDRIVE solutions for motor control 21/04/2021
    • High efficient PFC systems with STMicroelectronics technology 15/04/2021
    • X-CUBE-AZRTOS-H7 provides a full integration of Microsoft® Azure® RTOS in the STM32Cube environment for the STM32H7 15/04/2021
    • B-L462E-CELL1 Discovery kit for cellular IoT devices 15/04/2021
    • Comparison: ZigBee – WiFi – BlueTooth – UWB 12/04/2021
    • Home Assistant tips and tricks 26/03/2021
    • Suggested kit for install Home Assistant 20/03/2021
    • SPC5 – STMicroelectronics Boosts Automotive Innovation with Longevity Extension 18/03/2021
    • Tiny multi DC motor driver solution up to 35A each 18/03/2021
    • Home Assistant, easy way to automate your home. 13/03/2021
    • Custom STM32 boot loader 11/03/2021
    • X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32 05/03/2021
    • STM32U5 – based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements 26/02/2021
    • ChibiOS – ChibiStudio and Neapolis Innovation – STM 23/02/2021
EMCU
Proudly powered by WordPress.