EMCU
by E.Marinoni
Skip to content
  • Home
  • MCU
    • GigaDevice
      • GigaDevice – GD32 Cortex Mx introduction
      • GigaDevice launches the New GD32L233 Series 40nm Ultra-Low Power Process for Energy Saving Applications
      • GD32F4xxx examples for KEIL
    • RISC-V
      • RISC-V vs ARM
    • ST Microelectronics
      • Many thanks to STMicroelectronics
      • ST Live Days 2020
      • STM – Asset tracking soluctions
        • Asset tracking soluctions
      • STM Wiki, Community, Support, etc
      • MCU problems !!!!
      • ST7 families are in obsolescence
      • STM8
        • STM8 Introduction
          • Wiring from ST-LINK-v2 and STM8 for debug and programming
          • STM8CubeMX
        • STM8 Tutorial
          • Step By Step that explain how to start to develop a new program on STM8S
        • STM8 Evaluation boards
          • STM8S-Discovery
          • STM8L-DISCOVERY
        • STM8 Library
        • STM8 Class B – Self Test Library
        • STM8AF Safe ASIL A/B
        • STM8 – BootLoader, IAP, EEPROM, etc
        • Migration tips and tricks from one family of STM8 to another family of STM8
      • STM32
        • STM32 Introduction
          • STM32L0xx – ultra-low-power EnergyLite™ MCU – Cortex M0+
          • STM32L1xx – ultra-low-power EnergyLite™ MCU – Cortex M3
          • STM32L4xx – ultra-low-power EnergyLite™ MCU – Cortex M4
            • STM32L4 SMPS
          • STM32L4+ – ultra-low-power EnergyLite™ MCU – Cortex M4 at 120 MHz
            • STM32L4 SMPS
          • STM32L5 – Excellence in ultra-low-power with more performance – Based on Cortex M33
          • STM32U5 – based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements
          • STM32G0 – M0+ MCU, it sets a new definition of what an efficient microcontroller must offer
          • STM32G4 – Cortex M4 series @170 MHz for mixed-signal applications
          • STM32F0xx – Cortex M0
            • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using KEIL
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
          • STM32F1xx – Cortex M3
          • STM32F2 – High Performance – Cortex M3
          • STM32F3 – mixed-signal MCU – Cortex M4
          • STM32F4 – High Performance – Cortex M4
          • STM32F7xx – high performance – Cortex M7
          • STM32H7xx – very high performance – Cortex M7
            • STM32H7A3/7B3 lines
          • STM32WB series – 2.4 Ghz Wireless MCUs
          • STM32WL – Long-Range wireless Sub-GHz mcu
        • Migration tips and tricks from one family of STM32 to another family of STM32
        • STM32 and IoT and Cloud
          • IoT and Cloud
            • Interact with Microsoft® Azure® IoT Hub using the X-CUBE-AZURE package
            • STM32Cube function pack for IoT sensor node with telemetry and device control applications for Amazon AWS Cloud
          • STMicroelectronics Acquires Power Amplifier and RF Front-End-Module Specialist SOMOS Semiconductor
          • NB-IoT and LTE
            • STMicroelectronics makes acquisitions to further strengthen the wireless connectivity capabilities of STM32 microcontrollers
        • STM32 Education & Training
          • STM32 doc in ITALIAN & ENGLISH language but not only
          • How to find STM32 training and further documentations
          • STM One hour web seminar
          • STM32 Education
          • STM32 – MOOCs (Massive Open Online Courses)
          • STM32 Peripheral Education (see also MCU -> ATOLLIC)
            • KeeLoq application over SPIRIT1 + S2-LP and STM32
            • STM32 & IO-LINK
            • STM32 – TCP/IP solution
            • Stack & Heap
            • STM32 Basic Timer in Interrupt & PWM mode
            • TIM14 PWM output, duty cycle regulated using a potentiometer
            • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
            • How to manage two UART (USART2 and USART1) under Interrupt
            • How to implement “printf” for send message via USB on STM32 NUCLEO boards using KEIL
            • STM32F429-Discovery & USB Virtual COM
            • STM32F429-Discovery + USB Virtual COM + TFT
            • SPEEX free audio codec
            • X-CUBE-EXTBOOT – Programming an external Quad-SPI
            • STEVAL-PCC018V1 (Serial to USB converter)
            • HAMEG Spectrum Analyzer HM 8028 connected with the TEKTRONIX 2230 oscilloscope
            • How to use STM32 in the ARDUINO IDE
          • Internet courses (UDEMY) on STM32 & C at payment
        • STM32 Programming and Development Tools
          • STM32 and STM8 Embedded Software Solutions
          • How to program the STM32
            • Production programming solutions for STM32
            • STM32 Cube Programmer
          • Quad, Octo SPI – QSPI
            • Quad-SPI – QSPI – Octo-SPI and STM32
            • How to program an external QSPI connected to the STM32
          • STM32 HAL and LL library
          • Custom STM32 boot loader
          • STM32CubeIDE
            • First embedded program for STM32 mcu using STM32CubeIDE
            • STM32 – Measure time period and frequency of a signal using the TIMER
            • Printf and Getchar (Inter.mode) via USART2 plus Timer in PWM mode
            • H2O flow meter for control your water consumption
            • How to use STM32CubeIDE for write a C code for your PC under Linux
            • Embedded C programming
          • STM32 and Microsoft Azure RTOS
          • How to create project for STM32H7 with Ethernet and LwIP stack working
          • CUBE or CUBE-MX & Library
            • Tutorial on CUBE-MX and CUBE Library
          • STM32CubeMonitor
          • How to install the toolchain for develop on STM32
          • What should I use to develop on STM32 ?
            • Suggested KIT for developing on STM32
            • How to import the examples present in STM CUBE Library for AC6 into the ATOLLIC TrueSTUDIO for STM32
            • How to import in Atollic TrueSTUDIO for STM32 a project developed for AC6 (System WorkBench)
            • How to create, using CUBE-MX, a project for Atollic TrueSTUDIO® for STM32
            • ATOLLIC TrueSTUDIO Pro features available for free for STM32 mcu
            • Adjust the configuration of SW4STM32 (AC6) environment
            • How to update your KEIL license using the Product Serial Number
            • mBED
            • IDE tips and tricks
        • STM32 Open Development Environment (ODE)
        • STM32 Security – Class B – SIL 2/3
          • Introduction to STM32 mcu security
          • STM32 Security Ecosystem – STM32 Workshop October 2020
          • STM32 – Bootloader / Secure Boot
          • STM32 cryptographic library
          • STM32 Class B – IEC60335 – Self Test Library
          • STM32 SIL2/3
        • STM32 used in 5V environment
          • STM32 and 5V environment
        • STM32 & Audio
          • Audio SW packages for STM32
          • STM32 Alexa Voice Services Solution
          • Sensory – Audio tool
        • STM32 – AI, Neural Network, Predictive maintenance & C
          • STM32 – Neural Networks, AI, Machine Learning & Predictive maintenance
          • STM32 – AI & Image recognition
          • Cartesiam
            • STM32 and Cartesiam: for equipment monitoring and more (AI, Neural Networks and Predictive Maintenance)
          • STM Partner Program for AI & Neural Networks applications
        • Digital Camera Interface (DCMI) for STM32 MCUs
        • Why use CORTEX M family instead of 8 and 16 bit MCU
        • Change, from Arduino to STM32
        • STM32 Standard Peripheral Libraries (SPL) to STM32Cube Low-Layer (LL) APIs migration tool
        • Quick start guide to “charge transfer” technology used on STM32 and STM8 for touch sensing applications
        • STM32 – Evaluation Boards
          • STM32 – NUCLEO boards
          • How to update the FW on NUCLEO boards
          • How to use NUCLEO boards + Terminal Emulation + mBed under LUBUNTU (Linux)
          • Test board for RC motors
          • X-NUCLEO expansion board
          • STM32 Power Shield
        • STM32 and Graphics (HMI graphics interface)
          • TouchGFX + X-NUCLEO-GFX01Mx & X-NUCLEO-GFX02Z1
          • X-NUCLEO-GFX01M1 expansion board adds graphic user interface (GUI) for Nucleo boards
          • TouchGFX demo for STM32F746G-DISCOVERY
          • STemWIN – graphics demo for STM32F746G-DISCO and AC6
          • STemWIN – graphics demo for STM32F746G-DISCO and AC6 that turn on/off also a LED
          • STemWIN – Tools
          • Graphical libraries for STM32 (old version)
        • Mathworks to Enable Code Generation
        • uCLinux & STM32
        • STM32 DALI
        • DRONEs & STM32
        • STMicroelectronics video on YouTube
        • STMicroelectronics Community & Forum
      • Safety packages for STM8 and STM32
        • X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32
      • STM32MP1
        • STM32MP1 Series
          • STM32MP1 intro
        • STM32MPx Tutorial & C
          • Fast startup for use the STM32MP157C-DK2
          • STM32MP1 – interesting links
      • STM32 & STM8, “charge transfer” technology for touch sensing applications
      • Direct STM support only for key customers
      • ST Partner Program
      • STM on GITHUB.COM
      • STM32CubeIDE
        • STM32CubeIDE introduction
        • First embedded program for STM32 mcu using STM32CubeIDE
        • Printf and Getchar (Inter.mode) via USART2 plus Timer in PWM mode
        • STM32 – Measure time period and frequency of a signal using the TIMER
        • H2O flow meter for control your water consumption
        • How to use STM32CubeIDE for write a C code for your PC under Linux
        • STM32CubeIDE vs KEIL
      • ATOLLIC
        • ATOLLIC TrueSTUDIO Pro features available for free for STM32 mcu
        • How to create, using CUBE-MX, a project for Atollic TrueSTUDIO® for STM32
        • How to implement “printf” for send message via USB on STM32 NUCLEO boards using ATOLLIC
        • How to manage two UART (USART2 and USART1) under Interrupt
        • STemWIN – graphics demo for STM32F746G-DISCO and ATOLLIC that turn on/off also a LED
        • How to import the examples present in STM CUBE Library for AC6 into the ATOLLIC TrueSTUDIO for STM32
        • How to import in Atollic TrueSTUDIO for STM32 a project developed for AC6 (System WorkBench)
        • How To Import IAR EWARM Projects Into Atollic TrueSTUDIO
        • GPIOs interrupt & Atollic
        • STM32 Basic Timer in Interrupt & PWM mode
        • TIM14 PWM output, duty cycle regulated using a potentiometer
        • TIMER Counter – for example for reading an Input button
        • STM32 – RTC calendar and time for Atollic
        • How to interface the rotary encoder to STM32 (CUBE-MX + ATOLLIC)
        • How to use ADC in Interrupt mode
        • How to use 3 channels of the ADC in DMA mode using CUBE-MX and ATOLLIC
        • EEPROM emulation on STM32F030 (all developed using CUBE & ATOLLIC)
        • Placing code and data on special memory addresses using the GNU LD linker
        • Electric Sliding Gate based on STM32F0-Discovery
        • Atollic tips and tricks
          • How to create a new project in ATOLLIC
          • How to share your ATOLLIC project
          • How to import a .ZIP project in Atollic
          • Atollic debug configuration for quick DOWNLOAD and RUN
          • ATOLLIC – How to generate .exe – .bin – etc file extension
      • Oscillator design guide for STM8 and STM32 microcontrollers, AN2867
      • STM32 & STM8 product finder
      • ST-LINK
        • How to update the ST-LINK FW under Windows
        • How to update the ST-LINK FW under Linux (Lubuntu)
        • Wiring from ST-LINK-v2 and STM8 for debug and programming
      • STM32 Cube Programmer
      • STM Studio
      • SPC5
        • SPC5 Introduction
        • SPC5-STUDIO – free tools for develop on the SPC5 families
        • SPC5 – Embedded Software
        • SPC5 Automotive MCU Eval Tools
        • SPC5 cryptographic library
      • Tutorial on the web
      • Explore STM product portfolio
      • NeaPolis Innovation
        • ChibiOS – ChibiStudio and Neapolis Innovation – STM
  • Motor Control & C
    • Tutorial on Electrical Motors
    • Motor Control Acronyms
    • STM32 Motor Control
      • How to use the Motor Control Workbench and P-NUCLEO-IHM002
    • Combo – STSPIN
      • How to use the STEVAL-SPIN3201 (based on STSPIN32F0)
      • EVALKIT-ROBOT-1 evaluation kit ready-to-use servo brushless solution
    • STLUX and STNRG
    • High-integration chipset for EFI small engine applications
    • H-Bridge DC Motor Driver for Automotive Application
    • LIN, CAN & C
      • L99MM70XP – Integrated microprocessor driven device intended for LIN controlled exterior mirrors
      • L99PM72PXP – Advanced power management IC, with embedded LIN and HS CAN transceiver, supporting CAN Partial Networking
    • How to update the EVAL6470H-DISC and how to use it with the Pro Hybrid motor
    • L99UDL01 Automotive universal door lock IC – tips and tricks
  • RF & Connectivity
    • STM MAC address
    • ANTENNAs
      • Introductions to the Antennas
      • RF Choke
      • Custom antennas
    • RF Introduction
      • Comparison: ZigBee – WiFi – BlueTooth – UWB
      • Wireless data technologies
      • WiFi Modules
        • Introduction to the WiFi SPWF04Sx
          • Introduction to SPWF04Sx evaluation board
          • How to update the SW on SPWF04Sx (new WiFi module) present on the X-NUCLEO-IDW04A1 using Flash Loader
          • How to create a test account on IBM Watson IoT Platform + WiFi SPWF04Sx + TLS and MQTT
        • Introduction to the WiFi SPWF01Sx
          • Branca board based on STM WiFi module SPWF01SA.11
          • Quick start guide how to use the Branca board – SPWF01Sx module
          • WiFi – 802.11 Association & Dissociation Reason Code
      • BlueTooth
        • Old selection guide for BLE components and modules
        • STEVAL-BCN002V1 – Bluetooth LE sensor node development kit, based on BlueNRG-2 (compliant with Bluetooth 5.0)
        • BLE 4.x – 1 Mega bits per second is just wrong
        • Short introduction to BEACONS
        • BlueNRG Mesh
        • How to develop a new project on the SPBTLE-1S module (based on BlueNRG-1 component)
        • Suggested kit for testing BlueNRG-MS (BTLE v.4.1) on STM32 mcu
        • How to use SPBTLE-RF + NUCLEO-F401RE and graphics GUI
        • How to update FW via GUI on the BlueNRG, BlueNRG-MS or SPBTLE-RF (BlueNRG-MS module)
        • How to use BlueNRG-MS (BTLE v.4.1) & Enocean PTM 215B
        • Getting Started with ST Bluetooth Low Energy (BLE), NUCLEO and ARM mBED IDE/Compiler
        • Half – duplex voice streaming over Bluetooth Low Energy
        • STEVAL-BLUEMIC-1
        • BlueCoin – BTLE + MEMs for audio
        • SensorTile development kit
        • SensiBLE IoT Module – from: sensiedge.com
        • WESU1 – Wearable sensor unit reference design
        • Creating a BTLE star network connected via Wi-Fi to IBM Bluemix cloud
        • BEACON, iBEACON & BTLE
      • Sub1Ghz
        • ISM World wide regulation
        • Sub1Ghz Introduction
        • Sub1Ghz SW & FW
        • STM – kit for radio remote control
        • P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8
        • P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8 + SSD1306 I2C Oled Display
        • P2P based on S2-LP (STEVAL-FKI868V1) and NUCLEO-L053R8
        • How to use the X-NUCLEO-IDS01A4 (SPIRIT1) in P2P mode + ACK under mBED
        • How to use the X-CUBE-SUBG1 (SW) on SPIRIT1
        • How to use SPSGRF (Sub1Ghz module) for remote a thermostat
        • Wireless DoorBell
          • P2P wireless DoorBell, based on the SPIRIT1
          • Wireless DoorBell, based on the SPIRIT1 & mBed
      • LORA
      • SigFox
      • SigFox vs. LoRa
      • 6LoWPAN
        • 6LoWPAN wireless sensor network connected to the Internet through WiFi module
        • Quickly build a Contiki, 6LoWPAN, BTLE sensor network
      • WizziLab – Sub1Ghz multiprotocol Board & Concentrator
    • NFC & RFID
      • NFC introduction
      • STM NFC Sensor TAG, a complete solution for asset tracking applications (Smart Pallets)
      • ST25 – SDK for NFC – Multi platform Java library
    • GPS/Galileo/Glonass/BeiDou/QZSS
      • Teseo-LIV3F
    • SIM & eSIM
    • Cellular & Cloud
      • P-L496G-CELL01 – 2G/3G Cellular to Cloud Pack with STM32L496AG MCU and Quectel UG96
    • NB-IOT
      • Avnet Silica NB-IoT Sensor Shield (AVNET-SILICA BG96-SHIELD)
    • KNX
    • PLM
    • Smart Metering
    • Introduction to the signals modulation
  • MEMS & Sensors
    • MEMS software
      • GitHub MEMS driver written in C code
    • Teseo-LIV3F – GPS/Galileo/Glonass/BeiDou/QZSS
    • Accelerometers
    • Gyroscopes
    • e-Compasses
    • Humidity Sensors
    • iNEMO-Inertial Modules
    • MEMS Microphones
    • Pressure Sensors
    • Proximity Sensors
      • Proximity (ToF) VL53L1X in 2D LIDAR application
      • How to detect an object using the VL53L0X & X-NUCLEO-53L0A1 (evaboard)
      • VL53L0X (proximity sensor, up to 2m) and STM32F042K6
    • Temperature Sensors
    • UV sensors
    • Touchscreen Controllers
    • Automotive Sensors
    • MEMS Tutorial
    • MEMS general purpose evaboards
      • MEMS – Predictive Maintenance using an Intelligent Logging Kit for IoT applications
        • Some quick info concerning .JSON file
    • Open.MEMS & Unicleo-GUI
  • Wireless Charger
    • Wireless charger Introduction
    • STEVAL-ISB027V1 – quick start guide
  • IoT & Security
    • IoT
    • STM & Security
  • References
    • How to use the Serial to USB converter – STEVAL-PCC018V1
    • MCU architecture
    • Embedded C programming
    • C & C++
    • C & C ++ Things to remember
    • How to use STM32CubeIDE for write a C code for your PC under Linux
    • Acronimi – Acronyms
  • Python
    • MicroPython
    • Introduction to Python
    • How to install PYTHON on Windows 10
    • Python & LUBUNTU
    • How to run a Python file under LINUX
    • Python – Serial COM
  • Linux & C
    • Introduction to Linux
    • Linux basic commands
    • UBUNTU
    • Extra tools to install on Ubuntu
      • How to visualize Data & Time on the top bar on UBUNTU Ubuntu 18.04 LTS
    • How to install debian (UBUNTU) .sh file
    • Installare i pacchetti (.deb, .tar.gz, .tar.bz2, .sh, .run) su Linux Ubuntu
    • GtkTerm – Terminal Emulator
    • Minicom for use Serial COM under Linux
    • Configurare LUBUNTU
    • How to install the HP LaserJet Pro MFP M26a on UBUNTU (18.04.3 LTS)
    • How to use Android Studio, my first project
    • VirtualBOX – links
    • How to use STM32CubeIDE for write a C code for your PC under Linux
  • Standard Connectors
  • Useful electronic applications
    • MeshPower – an electronic application that helps men of the Third World
  • Arduino and STM32
    • Car Parking Assistant
  • Free time
    • Electronic Equipment
      • Open Bench Logic Sniffer
      • NanoVNA – antenna analyzer
    • CAD
      • EasyEda
        • EasyEda – Tutorial (in Italian language)
        • EasyEda – Tutorial n.2 (in Italian language)
      • Fritzing
      • Eagle
        • Eagle – Tutorial (in Italian language)
      • 3D Gerber Viewer – Mayhew Labs
    • 3D-Printer
      • How to test a filament for your 3D printer
      • Differences between PLA and ABS
      • Tutto quanto c’è da sapere su 3D Printer Creality Ender 3 (in Italian language)
      • Configure Ultimaker CURA software for use the Creality 3D printer model ENDER 3
      • Resins to finish the 3D printed pieces
      • 3D Objects
        • Stick-Sul – IR sensor LED
        • Support for 60mm diameter fan, for remove the humidity in an outdoor electric box.
        • Brackets to lift laptops
    • Mechanics
      • Bearing extractors
    • ESP8266
      • Module EPS8266-01 (WiFi)
      • ESPHome for drive EPS8266-01s in Home Assistant
    • Home & Building Automation
      • Home Alarm based on STM32 NUCLEO 64 pin
      • WiFi and Ethernet Video intercom
        • WiFi Video intercom on smartphone – EUFY HD 2K
        • WiFi and Ethernet Video intercom on smartphone – Perel Scamset8
      • Home Assistant
        • Introduction to Home Assistant – (hassio)
        • Suggested kit for install Home Assistant
        • Home Assistant (HA) tips and tricks
        • Install a text editor in Home Assistant for edit it’s files
        • How to enable some automation only during the night
        • Third party add-on or plug-in for Home Assistant (HA)
        • Introduction to Home Assistant (HA) Automations
        • ConBee II, ZigBee USB Gateway
        • Turn on the home entrance light if is night using the Xiaomi Motion sensor and Shelly 1
        • Osram Smart+ (LED bulb Zigbee) & Home Assistant
        • Introduction to Shelly 1
        • Remotely access to Home Assistant (from Internet)
        • ESPHome for drive EPS8266-01s or EPS8266-01 in Home Assistant
        • Xiaomi Mi Windows and Doors Sensor in Home Assistant
        • XIAOMI – AQARA, sensors & actuators
        • How to ADD new device to ConBee II – ZigBee USB Gateway
        • Home Assistant – Automation for Garden Irrigation
        • Comparison -> ZigBee – WiFi – BlueTooth – UWB
      • Electronic key access
        • Transponder controlled lock-unlock key
      • Distance sensors and photocells
        • Car Parking Assistant – STM32 + ARDUINO ide
        • How to detect an object using the VL53L0X & X-NUCLEO-53L0A1 (evaboard)
        • PIR sensor based on: NUCLEO-L011K4 + PANASONIC PIR EKMC1603111
      • KNX Home & Building Automation
        • KNX official page
        • STM – KNX transceiver
      • EVR electronics – GSM thermostat, Gate remote control and GSM telephone dialer
      • overVolt – Domotica (in Italian language)
      • Automatic Gate
        • DC motor with Honeywell Hall sensor (it’s used like an encoder)
        • Sliding gate with a guillotine for secure lock
        • Electric Sliding Gate based on STM32F0-Discovery
        • Automatic Swing Gate based on STM32F0-Discovery
        • Automatic Sliding Gate based on NUCLEO-L152RE
      • WireLess
        • Comparison: ZigBee – WiFi – BlueTooth – UWB
        • Compatibility between wireless 433MHz and WiFi (2.4GHz) objects purchased on the Internet
        • An idea how to show on your smartphone the status of your home burglar alarm
        • Kekeda 1PSC WiFi smart door/window sensor – SMART LIFE & ALEXA compatible
        • Smart Home switch controlled via WiFi and 433Mhz (Kerodamo)
        • 2ch radio control (in Italian language)
        • Amazon Smart Plug – Alexa compliant
        • Wireless DoorBell
          • Wireless DoorBell – Based on P2P for SPIRIT1 & NUCLEO-L053R8
          • Wireless Doorbell based on SPIRIT1 & NUCLEO boards
      • 12V To 3.3V 4 Channel Optocoupler Isolation Board Isolated Module PLC Signal Level Voltage Converter Board 4Bit
      • DC Current Meter Voltmeter w/ Ampere Shunt
      • Soil Humidity Sensor Hygrometer Measure Module
      • New Samsung Wind Free – How to configure a dual split
      • Temperature Controller Thermostat – XH-W3001 220Vac 10A
      • Programmable Timers
        • Timer – YOUTHINK Mod:TM601F – How to program it / Come programmarlo
        • Timer – Electraline 58107 – Come programmarlo (in Italian language)
    • IP CAM for surveillance
      • Network informations
      • Some Tips & Tricks regarding IP (Internet) Camera
      • Come configurare le telecamere Foscam modello FI9818W e similari con connessione via FastWeb
    • LAN – WLAN – Internet
      • GSM, EDGE, UMTS, HSPA, HSPA+, LTE, 5G
      • Identificativo MCC MNC degli operatori mobili Italiani
      • What means CAT 1, 3, etc, Band 3, 7, etc and Carrier Aggregation (Internet Key and Wireless Router)
      • The ADSL problem when you are end of line (very far from the ADSL BOX)
      • Final solution for reach a good and stable Internet connection
      • FastWeb + Fritz Box 7390 + Huawei B525s-23a
      • FastWeb + Fritz Box 7390 + Huawei E3372
      • IP Network Informations
      • Huawei B525s-23a – 4G, LTE (CAT6), WLAN Router, with WiFi at 2.4 and 5 GHz
      • Fritz! wlan repeater n/g
      • DLink
        • DSP-W215 mydlink™ Home Smart Plug – How to connect it to your ADSL modem
      • TP-LINK
        • Load Balance Broadband Router – TP-Link TL-R470T+
        • TP-Link RE200 – AC750 Wireless WiFi Repeater
        • TP-LINK – TL-WPA4220T KIT – How to use it
        • TP-Link CPE210 Access Point Wireless for External use
    • PC & C
      • Notebook Microtech e.Book PRO – N4000 with Ubuntu + WD GREEN 120GB Internal SSD M.2 SATA
      • How to install the HP LaserJet Pro MFP M26a on UBUNTU (18.04.3 LTS)
    • NAS – SYNOLOGY DS218J
      • Sync a Directory from local PC to your local Synology NAS
    • Display & Senor
      • How to use SSD1306 I2C OLED display and NUCLEO-L053R8 board
      • SSD1306 OLED Display & HDC1080 Temperature and Humidity sensor
    • Third party interesting software & video
      • Web Learning – STM32 Video Tutorial
      • Le Tan Phuc – STM32 Video Tutorial
      • Majerle WebSite
        • Majerle – github
    • Voltage Regulators
      • 78XX / 79XX ecco cosa sono…
      • LM317 Adjustable Voltage Regulator
    • Interesting Circuits
      • IR Remote Tester
      • 220 volt led blinking
      • 7 life hack with transistor
      • Stepper Motor Run Without Driver
    • Tubes diameters in inches and millimeters
    • Water tanks and accessories
    • How to make, from a shoe box, a fun box
    • Radio & C
      • AOR – AR3000 & AR3000A
    • Drone & C
      • Some info concerning FrSky Receiver
      • FlySky i6 FS-i6 radio control
      • 4WD Robot Car
      • How to use the Adafruit Motor Shield on STM32 NUCLEO
      • Understand the way to use HC-SRF04 on STM32 (Nucleo board) and mBED
    • Prese Telefoniche Italiane, Cavi Ethernet, Crimpatrici e collegamenti
    • Hacker corner
      • Gadgets that every Hacker must have
      • overVolt Blog – In Italian language
        • overVolt – Patreon Video (in Italian language)
        • overVolt – Patreon overVolt site (in Italian language)
        • overVolt – on YouTube (in Italian language)
  • Who I’m
    • Follow me on…
    • Casato dei Marinoni
  • Privacy
  • ReservedArea
    • ATTENZIONE a Facebook, WhatsApp e Messenger
    • Our WAN, LAN and WiFi configurations
    • Distribuzione H2O
    • Protected: Cronotermostato Wireless (868 MHz – BRAVO 93003101)
    • Programmatore Irrigazione da Rubinetto (mod. Verde)
    • Vastar Compressore Portatile con LCD per Moto, Auto, Bicicletta e Palloni
    • Scheda per cancello scorrevole e/o battente ad un motore a 220Vac – START-S3XL2018
    • Chinese IP & WiFi camera for external use
    • Development Board, Wiring, Button, etc
    • Tavolo da lavoro con materiale di BricoMan
    • Sopra Tavolo 50×60 h.50 cm con materiale di BricoMan
  • CoronaVirus – Covid-19
    • Combat the CoronaVirus (COVID-19) using the UV-C lamp for sterilize any things that enter in our home
    • Combattiamo il CoronaVirus (COVID-19) usando le lampade UV-C per sterilizzare qualsiasi cosa entra nella nostra casa
      • STM32 and STM8 Embedded Software Solutions
← Happy 1st May – Buon 1° Maggio
STM32Cube software for facial recognition applications on STM32 →

STM32WB5MM-DK – Discovery kit with STM32WB5MMG

Posted on 10/05/2021 by wp_2592768
If you like it, share it

For more info see here.

This entry was posted in STM32. Bookmark the permalink.
← Happy 1st May – Buon 1° Maggio
STM32Cube software for facial recognition applications on STM32 →
  • ATTENTION

    Use FIREFOX or CHROME for a clear view of the images present in this web site

  • May 2021
    M T W T F S S
    « Apr   Jun »
     12
    3456789
    10111213141516
    17181920212223
    24252627282930
    31  
  • Recent Posts

    • MDK KEIL COMMUNITY EDITION 17/11/2022
    • GD32 MCU Eclipse development environment for GNU ARM & RISC-V setup tutorial for Windows 17/11/2022
    • How to create a clean STM32CubeIDE Project ready to work with TouchGFX Designer 19/03/2022
    • GD32 – AN034 IAP routine based on USB host 22/02/2022
    • Cortex Mx performances 11/02/2022
    • GD-Link Adapter – Low coast emulator for GD32 01/02/2022
    • Where to find SW Tools and SW Examples for GD32 31/01/2022
    • GD32F4xxx examples for KEIL (Firmware_Library) 31/01/2022
    • GD-Link Programmer 31/01/2022
    • GD32W515 – core Cortex M33 that include Transceiver for WiFi 30/01/2022
    • GD32F3xxx examples for KEIL 27/01/2022
    • How to use the SW Expansion Packages in STM32CubeIDE 28/12/2021
    • Alexa or Home Assistant and P-NUCLEO-WB55 22/12/2021
    • TouchGFX + X-NUCLEO-GFX01Mx & X-NUCLEO-GFX02Z1 06/12/2021
    • RISC-V vs ARM 27/11/2021
    • GigaDevice launches the New GD32L233 Series 40nm Ultra-Low Power Process for Energy Saving Applications 24/11/2021
    • Many thanks to STMicroelectronics 20/11/2021
    • GD32F4xxx examples for KEIL 19/11/2021
    • GigaDevice – GD32 Cortex Mx introduction 03/11/2021
    • Home automation: BASICS 18/07/2021
    • (no title) 11/07/2021
    • ZigBee Mesh Network ver.3.0 (introduction) 17/06/2021
    • ZigBee Smart 4 Relay Switch 05/06/2021
    • Important Announcement – Annuncio Importante 19/05/2021
    • STM32 cryptographic firmware library software 11/05/2021
    • STM – MCU & MPU Embedded Software 11/05/2021
    • Predictive maintenance and anomaly detection with ST sensors 11/05/2021
    • Boost user experience & gain insights into consumer habits 10/05/2021
    • New eDesign feature makes your design project easier 10/05/2021
    • STM TouchGFX new demos available 10/05/2021
    • Smart LED drive 10/05/2021
    • STM32Cube software for facial recognition applications on STM32 10/05/2021
    • STM32WB5MM-DK – Discovery kit with STM32WB5MMG 10/05/2021
    • Happy 1st May – Buon 1° Maggio 30/04/2021
    • High-Voltage Super-Junction MOSFETs for Car Electrification 27/04/2021
    • TouchGFX 21/04/2021
    • STSPIN & STDRIVE solutions for motor control 21/04/2021
    • High efficient PFC systems with STMicroelectronics technology 15/04/2021
    • X-CUBE-AZRTOS-H7 provides a full integration of Microsoft® Azure® RTOS in the STM32Cube environment for the STM32H7 15/04/2021
    • B-L462E-CELL1 Discovery kit for cellular IoT devices 15/04/2021
    • Comparison: ZigBee – WiFi – BlueTooth – UWB 12/04/2021
    • Home Assistant tips and tricks 26/03/2021
    • Suggested kit for install Home Assistant 20/03/2021
    • SPC5 – STMicroelectronics Boosts Automotive Innovation with Longevity Extension 18/03/2021
    • Tiny multi DC motor driver solution up to 35A each 18/03/2021
    • Home Assistant, easy way to automate your home. 13/03/2021
    • Custom STM32 boot loader 11/03/2021
    • X-CUBE-STL – safety functions up to IEC 61508 safety integrity level SIL2/SIL3 for STM32 05/03/2021
    • STM32U5 – based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements 26/02/2021
    • ChibiOS – ChibiStudio and Neapolis Innovation – STM 23/02/2021
EMCU
Proudly powered by WordPress.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok