Category Archives: WireLess & Networking

KeeLoq application over SPIRIT1 + S2-LP and STM32

– STM has released the examples for interface the KeeLoq to SPIRIT1 & S2-LP & STM32 For more info see here.  

Posted in S2-LP, Spirit1, STM32, Sub1GHz, WireLess & Networking | Comments Off on KeeLoq application over SPIRIT1 + S2-LP and STM32

RF Introduction

– Basic RF terminology – – • Transmitter (only TX)• Receiver (only RX) – • Transceiver (both TX & RX)• SoC (Transceiver + MCU) • dBm – is a measure of RF Power referred to 1 mW (0 dBm) ……………10mW(10dBm), … Continue reading

Posted in Antenna & C, Sub1GHz, WireLess & Networking | Comments Off on RF Introduction

Wireless DoorBell – Based on P2P for SPIRIT1 & NUCLEO-L053R8

– This is a release of DoorBell based on P2P for SPIRIT1. For more technical details see the: P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8 For reading more, click here.

Posted in Spirit1, STM32, STM32L0, Sub1GHz, WireLess & Networking | Comments Off on Wireless DoorBell – Based on P2P for SPIRIT1 & NUCLEO-L053R8

P-L496G-CELL01 – 2G/3G Cellular to Cloud Pack with STM32L496AG MCU and Quectel UG96

– The P-L496G-CELL01 STM32 discovery pack for 2G/3G cellular to cloud (STM32-C2C/2G-3G) is a turnkey development platform for cellular and cloud technology based solutions. In this evaboard is used the Quectel UG96. For reading more, click here.

Posted in STM32, WireLess & Networking | Comments Off on P-L496G-CELL01 – 2G/3G Cellular to Cloud Pack with STM32L496AG MCU and Quectel UG96

P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8 + SSD1306 I2C Oled Display

This is a new release of the P2P based on SPIRIT1, with the addition of the SSD1306 I2C Oled Display. This P2P sw work exactly as the previous one, for more technical info on P2P see here. For reading more, … Continue reading

Posted in Spirit1, STM32, WireLess & Networking | Comments Off on P2P based on SPIRIT1 (X-NUCLEO-IDS01A4) and NUCLEO-L053R8 + SSD1306 I2C Oled Display

STM32WB series of Wireless MCUs

STMicroelectronics Powers Next-Generation IoT Devices with Higher-Performing Multiprotocol Bluetooth® & 802.15.4 System-on-Chip. Fusion of 32-bit ultra-low-power microcontroller and highly integrated Bluetooth 5 (BLE) and IEEE 802.15.4 radio creates high-performing wireless platform for feature-rich smart connected objects Dual Arm® Cortex®-M cores … Continue reading

Posted in IoT, STM32, WireLess & Networking | Comments Off on STM32WB series of Wireless MCUs

TP-Link CPE210 Access Point Wireless for External use

The TP-Link CPE210 is multifunctional WiFi access point designed to cover large indoor and outdoor areas such as villas, gardens, industrial halls and gyms thanks to the dual high gain antenna and the powerful 2.4 GHz operating amplifier (802.11 b/g/n). … Continue reading

Posted in WireLess & Networking | Comments Off on TP-Link CPE210 Access Point Wireless for External use

Getting Started with ST Bluetooth Low Energy (BLE), NUCLEO and ARM mBED IDE/Compiler

The kit is based on: X-NUCLEO-IDB05A1 NUCLEO-F401RE All is developed using ARM mBED ad for this reason is easy to transfer on other STM32 or MCUs. More details are here.

Posted in STM32, WireLess & Networking | Comments Off on Getting Started with ST Bluetooth Low Energy (BLE), NUCLEO and ARM mBED IDE/Compiler

TP-LINK – TL-WPA4220T KIT – How to use it

For configure this kit follow the steps explained here.

Posted in WireLess & Networking | Comments Off on TP-LINK – TL-WPA4220T KIT – How to use it

Wireless Doorbell based on SPIRIT1 & NUCLEO boards

This project is used for create a Wireless Doorbell based on SPIRIT1 & NUCLEO boards. For more info click here.  

Posted in Spirit1, STM32, WireLess & Networking | Comments Off on Wireless Doorbell based on SPIRIT1 & NUCLEO boards